background image

Introduction

Congratulations on your purchase of the Zing standing frame. We at Altimate Medical have designed the 
Zing with your needs in mind.

ZING Description 
The Zing line of products is intended for individuals who are able to transfer with assistance from a 
caregiver and/or lifting device. It is a useful tool for rehabilitation, home and school use. Zing
standing frames support the user from various positions to the standing position. 

Indications for Use 
The Zing products have a flat surface that can be adjusted from the prone or supine position to 
increase tolerance to an upright standing position. The Zing Portable Size 1 is indicated for most individuals 
weighing up to 36 lbs. and up to 36 inches in height.

This manual is an integral part of your standing system and  should be read completely and 
thoroughly by anyone that will be operating the unit . 
This will ensure the Zing is assembled properly 
and used in the most beneficial manner. 

The Zing must be used with a qualified adult attendant present . Should any problem arise that you 
cannot solve by reading this  manual, please contact your local supplier or call Altimate Medical, 
Inc., at 800-342-8968 or 507-697-6393.

It is necessary to inspect your Zing at least weekly to ensure it is in safe operating condition. Zing 
adjustments that are listed in the product owner’s manual can be made by the operator by following the 
instructions for use. After an adjustment is made, inspect the Zing to ensure all hardware and adjustable 
components are properly secured per the instructions for use. Replacement of worn parts, major 
adjustments, or any other important corrections should be handled by an authorized supplier or service 
center. Only Altimate Medical, Inc., approved replacement parts should be used to ensure safety and 
performance.

Do not use the Zing without consulting your physician . Failure to consult a qualified physician prior 
to using the Zing could lead to severe medical problems . We recommend a good standing program 
be established and supervised by a qualified physician or occupational/physical therapist .

Contraindications:
• Standing/weight bearing may not be an option for the following reasons:
• If the user has severe contractures or range of motion issues
• If the user has severe osteoporosis or brittle bone disease
• If the user has postural orthostatic hypotension
• If the user has dislocated joints

Join the Standing Community!

Our goal is simple - to empower people with disabilities to stand up for their health. Connect, share, and 
learn from other people with disabilities, special needs parents, clinical professionals, and the experts in 
standing on one of our social networking communities. 

Find Zing on these social networking sites:

Page 18

Page 1

19. The unit can be easily transported or stored.

Parts Detail

Summary of Contents for Altimate Medical Zing

























Reviews: