Hip Supports
25. The hip support width can be adjusted by
loosening the knobs behind the pelvic pad.
Hip supports come with both thumb knobs
and set screws for fore/aft positioning.
Tighten securely.
Lateral Supports
26. The lateral support width can be
adjusted by loosening the knobs on the
back of the unit. Always tighten securely.
The depth can be adjusted by loosening
the two bolts, once the desired position is
reached. Tighten securely.
27. The lateral supports have a number of
attachment holes on the back of the pad
which will allow for additional positions
vertically and horizontally. The pads may
also be bolted at a high, low, or neutral
position in order to effect greater pad range.
28. To adjust the lateral support height,
loosen knob, adjust to desired position.
Tighten securely.
Page 10
Page 9
Adjustments & Usage
Trays
Black Molded/Multi-Adjustable Tray Height
19. To adjust tray height, loosen knobs on the
back of unit and set to desired position. Tighten
securely.
Black Molded Tray Depth
20. To adjust the tray, loosen the knob until
resistance is felt, then flip the red lever in the
center of the knob fully open.
DO NOT continue to turn the knob
counterclockwise. Forcing the knob past its stop
will damage the mechanism.
The tray may now be removed completely, or
adjusted to the desired position using the click
detent positions as a guide.
Multi-Adjustable Tray Depth
21. Loosen knob under the tray, pull or push into
desired position. Tighten securely.
Multi-Adjustable Tray Angle
22. To adjust tray angle, loosen ratchet handles
on both sides of the tray, set to desired
position. Tighten securely.
Multi-Adjustable Tray Swing-Away
23. Loosen knob on one side only until you are
able to swing tray away.
24. Swing tray away to allow for transfers.
!
20
19
24
22
23
21
25
28
27
26
