background image

Introduction

Congratulations on your purchase of the EasyStand Zing standing frame. We at Altimate Medical have 
designed the EasyStand Zing with your needs in mind.

EasyStand Description 
The EasyStand line of products is intended for individuals who are able to transfer with assistance from a 
caregiver and/or lifting device. It is a useful tool for rehabilitation, home, school, and work use. EasyStand 
standing frames support the user from various positions to the standing position. Various support and 
positioning options may be added to facilitate individual needs. 

Indications for Use 
The EasyStand Zing products have a flat surface that can be adjusted from the prone or supine position to 
increase tolerance to an upright standing position. The Zing Size 1 is indicated for most individuals 
weighing up to 70 lbs. 

This manual is an integral part of your standing system and  should be read completely and 
thoroughly by anyone that will be operating the unit . 
This will ensure the EasyStand Zing is assembled 
properly and used in the most beneficial manner. 

The EasyStand Zing must be used with a qualified adult attendant present . Should any problem arise that 
you cannot solve by reading this  manual, please contact your local supplier or call Altimate Medical, 
Inc., at 800-342-8968 or 507-697-6393.

It is necessary to inspect your EasyStand Zing at least weekly to ensure it is in safe operating condition. 
EasyStand adjustments that are listed in the product owner’s manual can be made by the operator by 
following the instructions for use. After an adjustment is made, inspect the EasyStand to ensure all 
hardware and adjustable components are properly secured per the instructions for use. Replacement of 
worn parts, major adjustments, or any other important corrections should be handled by an authorized 
supplier or service center. Only Altimate Medical, Inc., approved replacement parts should be used to 
ensure safety and performance.

Do not use the EasyStand Zing without consulting your physician . Failure to consult a qualified 
physician prior to using the EasyStand Zing could lead to severe medical problems . We recommend 
a good standing program be established and supervised by a qualified physician or occupational/
physical therapist .

Join the Standing Community!

Our goal is simple - to empower people with disabilities to stand up for their health. Connect, share, and 
learn from other people with disabilities, special needs parents, clinical professionals, and the experts in 
standing on one of our social networking communities. 

Read, share, and comment on the EasyStand Blog at blog.easystand.com 
Find EasyStand on these social networking sites:

Parts Detail-MPS 

(multi-position stander)

Page 18

Page 1

Summary of Contents for ESPA5520G

























Reviews: