background image

•  Please read and understand all safety precautions and user instructions prior to use. Call Altimate Medical at 800-342-8968 or 

 

507-697-6393 with any questions or for additional information.

•   If a user does not meet the specifications below and has not been properly fitted by a qualified therapist or physician, 

 

Altimate Medical, Inc., does not recommend using the EasyStand Zing. 

  

 

Zing Size 1- is designed to accommodate most individuals up to 44” (112 cm) and up to 70 lbs. (32 kg).   

For more detailed specifications visit our website www.easystand.com

•   The EasyStand Zing should not be used without first consulting a qualified physician. Failure to consult a qualified physician prior 

 

to using the EasyStand Zing could lead to severe medical problems. We recommend a good standing program be established and 

 

supervised by a qualified, registered physical/occupational therapist.

•   The EasyStand Zing should always be used with a qualified adult attendant present. Consult with your therapist or physician for proper  

 

foot placement and angle. Never leave a child unattended in the Zing.

•   Do not make foot plate adjustments to the Zing while a child is standing. 
•   It is necessary to inspect your EasyStand Zing at least weekly to ensure it is in safe operating condition. Pay particular attention for loose 

 

hardware. Replacement of worn parts, major adjustments, or any other important corrections should be handled by an authorized dealer 

 

or service center. Only Altimate Medical, Inc. approved replacement parts should be used to ensure safety and performance.

•  If your EasyStand is being used in the home environment, please inspect your unit prior to each use to ensure there is no damage or 

 

unexpected wear to the EasyStand that may have been caused unintentionally by pets, pests or children.      

•   Ensure the necessary support and alignment options are in position prior to placing the user into the standing position.  
•   Storage/Transport Conditions: Temperature: 14˚F -122˚F (-10˚C - 50˚C), Relative humidity: 20% - 90% at 86˚F (30˚C), Atmospheric Pressure:  

 

700 to 1060hPa.

•  If the unit was exposed to temperatures of less than 50˚F (23.5˚C), allow unit to warm to room temperature before use. 
•  The expected service life of an EasyStand is considered 5 years under normal use conditions. Note: This may vary based on frequency of  

 use. 
•   Standing equipment is designed for indoor use on level surfaces only. Keep casters locked while in use.  
•   It is not recommended to transport the unit with a user in the standing position.  
•  Extreme movements laterally or front to back may cause the unit to tip.    
•   It is recommended the equipment be stored at normal room temperature and humidity levels. 
•   Altimate Medical products are specifically designed to be used with Altimate Medical accessories and options. Unless otherwise noted, 

 

accessories and options from other manufacturers have not been tested by Altimate Medical and are not recommended for use with 

 

Altimate Medical products.

•  Product Modifications made without express written consent (including, but not limited to, modification through the use of unauthorized 

 

parts or attachments) are not recommended and will void the product warranty.    

 Caution: This equipment is designed to accommodate a range of users; therefore the unit has various adjustment slots and holes. 

 

Avoid placing fingers or other body parts in any of these areas.  

 Caution: While in use this equipment has various moving parts, familiarize yourself with the unit and avoid placing hands or fingers 

 

near any of these areas.  

 Caution: Advise bystanders to keep clear of the unit while in use.

Safety Precautions 

!

!

!

Page 2

Page 17

Parts Detail-Supine

Summary of Contents for ESPA5520G

























Reviews: