FIG. 1A
FIG . 1A- For the standard foot plate, place the base unit flat, as
shown. Remove the rubber cover on the lower part of the base
to expose the inside of the unit and remove bolts from the foot
plate bracket. Place foot plate onto the base and insert bolts,
tighten nuts securely. Flip the base unit back upright.
FIG . 1B- For the multi-adjustable foot plates, insert ratchet
handle into hole and tighten securely. Repeat step for other
side.
FIG . 2- Using the bolts provided, place the legs on each side of
the base and tighten bolts securely.
For Swing-Out Leg assembly, see p . 5 .
FIG . 3- Remove bolts from the lifting rods, place the arms onto
the lifting rod on the base, insert bolts and tighten securely.
FIG . 4- Remove the yellow shipping tab that is placed onto
the tray column . Insert the tray post into the front
column with the mounting holes toward the top. Place the tray
assembly onto the tray post, insert nut into slot and bolt into
hole, tighten securely. The tray clamp on the front frame may
need adjustment to fit the tray post into the frame.
FIG. 2
FIG. 3
FIG. 4
Leg
Arm
Clear Tray
Option Shown
Rubber
Cover
Tray Assembly
FIG. 1B
2