FIG. 10
Handle
Assembly
FIG. 11
FIG. 11
FIG . 10- Place the leg inside the leg bracket. Insert the
ratchet handle into the slotted hole and tighten securely.
Insert the bolt into the hole in the bracket and through the leg.
Attach nut and tighten securely.
FIG . 11- Assemble handle assembly as shown, place the
handle assembly onto the caster brackets as shown. Make
sure the washers are placed between the caster bracket and
the handle arm. Place nut onto the bolt and tighten securely.
FIG. 11
Caster
Brackets
FIG. 5
FIG. 10
Ratchet Handle
6