18
② E nter the output voltage setting interface. Press and hold the function setting key
for more than half a
second(less than 2 seconds), then come to setting interface of output voltage OPU, at this time, the letters
“OPU” will not flash any more. The numerical value next to the OPU will flash. Press and hold the inquiring
key (
,
)
for more than half a second (less than 2 seconds), select the numerical value in
accordance with “OPU” function. The provided voltages are 208V, 220V, 230V, 240V, you can choose
anyone by yourself (The default value is 220V).
③ Confirm the output voltage setting interface. After selecting num erical val
ue, press and hold the function
setting
for more than half a second (less than 2 seconds). Now, the OPU setting function is completed
and the numerical value will light without flash.
④ E xit from the setting interface. Press and hold function setting key
for more than half a second (less
than 2 seconds), exit from the setting interface and return to main interface.
4.6.4 Low battery voltage shutdown point setting
①
Enter the setting interface. Press and hold the function setting key
for more than 2 seconds, then
come to setting interface, Press and hold the inquiring key (
,
)
for more than half a second(less
than 2 seconds), select the function setting, choose battery voltage setting interface, at the moment, the
letters “bat” will flash.
②
Enter the battery voltage selecting interface. Press and hold the function setting key
for more than half
a second(less than 2 seconds), then come to setting interface of battery voltage, this time, the numerical
value will flash. Press and hold the inquiring key (
,
)
for more than half a second (less than 2
seconds), select the numerical value in accordance with “battery” function. The provided voltages are 10V,
10.2V, 10.5V, numbers stand for the voltage of each battery, you can choose anyone by yourself (The
default is 10V), anyone has been chosen, under BAT mode, UPS will shutdown when its battery voltage
achieve the voltage you chose.
③
Confirm the battery voltage selecting interface. After selecting numerical value, press and hold the function
setting
, for more than half a second (less than 2 seconds). Now, the battery setting function is
completed and the numerical value will light without flash.
④ E xit from the setting interface. Press and hold function setting key
for more than half a second (less
than 2 seconds), exit from the setting interface and return to main interface.