9
8
TROUBLESHOOTING
PROBLEM
SOLUTION
Scale displays “
Err0
”
Initialization Error: The scale cannot be initialized for
weighing.
Scale displays “
bAtt
”
for low battery, No power
Check batteries for proper installation (polarities are
correct). Replace both worn batteries.
Problem persists or other conditions
Call Eat Smart for support at 866-843-3905 (8 to 5 MST).
CARE & MAINTINANCE
To protect and maintain your EatSmart Baby Scale in the best possible
condition follow these directions as closely as possible.
1. Store and operate the unit in a safe dry location.
Drastic changes in temperature over time can affect the quality of
weight measurement. Do not expose to direct sunlight, extreme hot/
cold or high humidity.
2. Clean with a damp, soft cloth.
Avoid abrasive cleaners and never
sink or submerge in water.
3. Remove batteries if not in use for three months or longer.
4. Do not store scale where you store cleaning chemicals.
The
vapors from some household products may affect the electronic
components of your scale. Do not store scale on its side.
5.
This scale is designed to have a weight capacity of 44 lbs/20 kgs. To
prevent damage, do not place more than 44 lbs/20 kgs on it.
6. Use unit consistent with instructions provided in this manual.
Scale displays “
Err2
”
Overload Indicator: Too much weight has been placed
on the scale and it is overcapacity. Remove weight
before proceeding.
SPECIFICATIONS
Model: EatSmart Precision BabyCheck Digital Scale ESBS-60
WARRANT Y
The EatSmart warranty covers defects in material and workmanship of
the product under normal use for a period of two (2) years from the
date of retail purchase. The warranty does not cover damages resulting
from misuse, abuse, immersion, normal wear and tear or unauthorized
modification.
Should this scale require service (or replacement at our option) while
under warranty, please contact EatSmart for return authorization and
troubleshooting.
EatSmart 866-843-3905 (8 to 5 MST) or eatsmartproducts.com
There are no expressed warranties except as listed above. This warranty
gives you specific legal rights which may vary from state to state.
NOT LEGAL FOR TRADE.
Capacity: 44 lbs / 20 kgs
Measurement Units: Pounds / Kilograms
Graduation: 0.5 oz / 10g
Display: 2.9” x 1.3” Display
Low Battery Indicator: “bAtt”
Overload Indicator: “Err2”
Unit Dimensions: Approximately 13.80” x 23.50” x 2.91” (350 x 597 x 74mm)
Unit Weight: Approximately 3.42 lbs (1.5 kg )
Power: 2 ‘AAA’ Batteries (included)
Made in China
Initialization Error: “Err0”
