15
5.
Using the clamp, starting the motor, changing the speed
Using the clamp – after placing a record on the platter, place the record clamp on the spindle
and record. Do not screw down the clamp for playback – this function of the clamp is used only
when removing or replacing the platter.
Controling the turntable using the “Speed Control” panel:
•
To start rotation of the platter, press either the button labeled
33
or
45
, depending on the
speed of the record to be played, 33 rpm or 45 rpm.
•
When you want to stop the turntable, or when it is not in use, switch it to
STANDBY
mode
by pressing the button labeled
STBY-STOP
.
•