Network Management Card
– User Manual
34003991EN/EB
Page
107/118
Inverter overload
Inverter load OK
Inverter over temperature
Inverter temperature OK
Inverter short circuit
Inverter OK
Inverter thermal overload
Inverter load OK
Load not protected - On Automatic Bypass
Load protected - Return from Bypass
Load short circuit
Load OK
Load not powered
Load powered
Protection Lost
Protection OK
Emergency button ON
Emergency button OFF
Fan fault
Fan OK
Redundancy Lost
Redundancy OK
Low battery
Battery OK
UPS communication failed
UPS communication restored
UPS data base not available
UPS data base OK
UPS on battery
UPS on normal AC
UPS internal fault
UPS OK
UPS overload
UPS returns to normal load
UPS overtemperature
UPS temperature OK
Imminent UPS shutoff
UPS OK
<Sensor name>:
Temperature is above high threshold xx °C
<Sensor name>:
La température est au dessus du seuil haut xx °C
<Sensor name>:
Humidity is above high threshold xx %
<Sensor name>:
L'humidité est au dessus du seuil haut xx %
<Sensor name>:
Temperature is below low threshold xx °C
<Sensor name>:
La température est en dessous du seuil bas xx °C
<Sensor name>:
Humidity is below low threshold xx %
<Sensor name>:
L'humidité est en dessous du seuil bas xx %
<Sensor name>: <Input #1 label> <when closed label>
<Sensor name>: <Input #1 label> <when closed label>
<Sensor name>: <Input #1 label> <when open label>
<Sensor name>: <Input #1 label> <when open label>
<Sensor name>: <Input #2 label> <when closed label>
<Sensor name>: <Input #2 label> <when closed label>
<Sensor name>: <Input #2 label> <when open label>
<Sensor name>: <Input #2 label> <when open label>
