II
CONTENTS
1.
Introduction ...........................................................................................1
2.
System description...............................................................................1
2.1 General description......................................................................................1
2.2 System Configuration ..................................................................................3
3.
Safety Information ................................................................................4
4.
Storage...................................................................................................5
5.
Installation .............................................................................................5
5.1 Environment ................................................................................................5
5.2 Rear panel views .........................................................................................9
5.3 Connection to mains and loads (700 - 3000 VA)........................................14
5.4 Default settings at the factory ....................................................................15
6.
Computer and Alarm connections ....................................................16
6.1 EPO port (emergency power off) ...............................................................17
6.2 Load segments (700 - 3000 VA) ................................................................17
7.
User’s guide to operations ................................................................18
7.1 Starting and shutting down the UPS ..........................................................18
7.2 Button Operation .......................................................................................18
7.3 Control Panel functions..............................................................................19
7.4 Interpreting UPS messages.......................................................................23
7.5 Trouble shooting ........................................................................................24
8.
Maintenance ........................................................................................25
8.1 Replacing batteries ....................................................................................25
Technical Specifications ......................................................................27
10.1 Power Range 700-3000 VA (LV) ..............................................................27
10.2 Power Range 700-3000 VA (HV) .............................................................27
10.3 Power Range 700-3000 VA (19” Rack-mount model) ..............................28
III
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTION
●
CAUTION (UPS Having Internal Batteries)
:
Risk of electric shock -
Hazardous live parts inside this unit are energized from the battery supply even when
the input AC power is disconnected.
●
CAUTION (No User serviceable Parts)
:
Risk of electric shock, do not
remove cover. No user serviceable parts inside. Refer servicing to qualified service
personnel.
●
CAUTION (Non-isolated Battery supply)
:
Risk of electric shock,
battery circuit is not isolated from AC input, hazardous voltage may exist between
battery terminals and ground. Test before touching.
●
WARNING (Fuses)
:
To reduce the risk of fire, replace only with the same
type and rating of fuse.
●
WARNING
:
Intend for installation in a controlled environment.
●
CAUTION
:
Do not dispose of batteries in a fire, the battery may explode.
●
CAUTION
:
Do not open or mutilate the battery, released electrolyte is harmful to
the skin and eyes.
●
CAUTION
:
A battery can present a risk of electric shock and high short circuit
current. The following precaution should be observed when working on batteries
Remove watches, rings or other metal objects.
Use tools with insulated handles.
●
To reduce the risk of electric shock, disconnect the UPS from the mains supply before
installing a computer interface signal cable. Reconnect the powers cord only after
signaling interconnections have been made.
●
Servicing of batteries should be performed or supervised by personnel knowledge of
batteries and the required precautions. Keep unauthorized personnel away from
batteries.
9.
