INSTALLATION
EATON
Powerware
®
9135 Two−in−One UPS (5000/6000 VA) User’s Guide
S
164201726 Rev 1
www.powerware.com
28
11.
Optional.
Install the rear hold−down brackets (included with the rail
kit) if you need to move the rack enclosure with the UPS already
rack−mounted inside (see Figure 8).
Figure 8. Installing the Rear Hold−Down Brackets
12.
Slide the UPS and any optional EBMs into the rack.
13.
Secure the front of the cabinet to the rack using two M6
12 mm
round−head screws on each side (see Figure 9).
Figure 9. Installing the Cabinets
