UPS SETUP
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide
S
164201642 Rev C
www.eaton.com/powerquality
19
7.
Remove the four M4 screws securing the rear stabilizing bracket to
the cabinet rear panel and remove the bracket (see Figure 6). Retain
the hardware for later use.
NOTE
Be sure to retain the rear stabilizing bracket and hardware for later re-assembly onto
the UPS.
NOTE
Hold the UPS so that the bolts can be removed easily without the UPS rolling
backward.
8.
Remove the two M10 bolts securing the front shipping bracket to
the pallet. Remove the four M4 screws securing the bracket to the
cabinet front panel and remove the bracket. See Figure 6.
Rear Stabilizing Bracket
M4 Screws
(under CB box)
Front
Shipping
Bracket
M10 Bolts
M4 Screws
Figure 6. Removing the Brackets
Summary of Contents for 9355-F47 Unirom
Page 1: ...Eaton 9355 F47 Unirom UPS 10 15 kVA User s Guide ...
Page 4: ......