SAFETY WARNINGS
EATON
Powerware
®
9395 UPS (650–825 kVA) Installation and Operation Manual
S
164201725 Rev 2
www.powerware.com
2−2
S
The operating environment should be maintained within the parameters stated in this manual.
S
Keep surroundings uncluttered, clean, and free from excess moisture.
S
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the
equipment.
C
A
U
T
I
O
N
To prevent damage to the wiring channel and wiring in the UPS cabinet base when lifting or moving the
cabinet:
S
Lift and move the cabinet using only the front or rear forklift slots.
S
Verify that the forklift forks are in a horizontal position before inserting them into the forklift slots.
DO NOT angle fork tips upward.
S
Insert the forks all the way through the base. DO NOT insert forks partially into the base to move the
cabinet.
S
Forks may be partially inserted into the front or rear forklift slots for minor positioning if the forks are
kept in a horizontal position with no upward angling.
S
DO NOT use the forklift slots on the end of the cabinet to move the cabinet.
S
End forklift slots may be used for minor positioning if the forks are kept in a horizontal position with no
upward angling.
If these instructions are not followed, damage to the wiring channel and wiring will occur.
A
V
E
R
T
I
S
S
E
M
E
N
T
!
S
Les batteries peuvent présenter un risque de décharge électrique ou de brûlure par des courts-circuits de
haute intensité. Prendre les précautions nécessaires.
S
Pour le replacement, utiliser le même nombre et modéle des batteries.
A
T
T
E
N
T
I
O
N
!
S
Une mise au rebut réglementaire des batteries est obligatoire. Consulter les règlements en vigueur dans
votre localité.
S
Ne jamais jeter les batteries au feu. L’exposition aux flammes risque de les faire exploser.
