UPS Operating Instructions
7-6
Eaton
®
Power Xpert
®
9395C UPS Installation and Operation Manual
P-164000821—Rev 01
www.eaton.com/powerquality
A
The
UPS status area
automatically displays the Eaton model number, current time and date, active alarms,
active notices, and load percent and battery run time for the UPS. If the Eaton Environmental Monitoring
Probe is installed, the temperature and humidity sensed by the probe will also be displayed. The small
head symbol between the system model and time allows the operator select a different language from an
imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices and
alarms may be accompanied by an audible horn. To silence the horn, touch anywhere on the control panel
once. For more information about alarms and notices, see paragraph 7.3.12.
B
The
information area
contains data about UPS status and operations.
C
After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the
system access pass code for operation. See Table 7-2 Security Levels and Functions.
Figure 7-6. Sign In or Password Request Screen
Table 7-2. Security Levels and Functions
Level
Name
Passcode
Description
0
USER
NONE
USER
1
CONTROL
1111
USER + CONTROL
2
CONFIGURATION
0101
USER + C CONFIGURATION
3
SERVICE
Service Only
USER + C CONFIGU SERVICE
A
B
C
ENTER
BUTTON
Number
indicates
security
level 0 - 3
Summary of Contents for 9395C-1000/1000
