Eaton 93PM Integrated Battery Cabinet-Small Welded (IBC-SW) Installation Manual P-164000639—Rev 1
www.eaton.com/powerquality
7-1
Chapter 7
Product Specifications
This section provides the following specifications:
l
Model Numbers
l
Battery specifications
l
Battery runtimes
l
Environmental and safety specifications
7.1
Model Numbers
The Integrated Battery Cabinet – Small Welded (IBC–SW) is available in one model to meet the needs of the
Eaton 93PM UPS product line.
7.2
Specifications
The following sections detail the battery specifications, battery runtimes, and the environmental and safety
specifications for the UPS. Specifications are subject to change.
7.2.1
Battery Specifications
CAUTION
The shelf life for the batteries installed in the IBC–SW is 12 months from the date code on the
battery. The recharge date is also stated on a label inside the IBC–SW.
Failure to recharge the batteries before the expiration of the shelf life will result in reduced
discharge time, shorter float service life, and will void the warranty.
Integrated Battery Cabinet (IBC–SW)
Models
Description
Eaton 93PM Integrated Battery Cabinet–Small
Welded
IBC–SW for Eaton 93PM 50 kW, 100 kW, 150 kW and 200 kW UPS
IBC–SW Battery Type
Eaton PWHR12200W4FR or CSB HRL12200WFR 80 Watts/cell
valve-regulated lead-acid (VRLA) with a 3-5 year float service life at 77°F
(25°C)
Number of Strings
1 string
Battery Replacement
Must be replaced by a qualified service technician
Protection
IBC–SW output protected by 250A circuit breaker.