Page 45
9PX 1-3 KVA US_EN
ENGLISH
9. Glossary
Bypass AC source
Source supplying the bypass line. The equipment can be transferred to the by-
pass line if an overload occurs on the UPS output, for maintenance or in
the event of a malfunction.
Frequency converter
Operating mode used to convert the AC-power frequency between the UPS input
and output (50Hz -> 60Hz or 60Hz -> 50Hz).
Low-battery warning
This is a battery-voltage level indicating that battery power is low and that
the user must take action to prevent the imminent break in the supply of power
to the load.
Backup time
Time during which the load can be supplied by the UPS operating on battery
power.
Load
Devices or equipment connected to the UPS output.
HE mode
Operating mode by which the load is supplied directly by the AC source if it is
within the tolerances defined by the user. This mode reduces the consumption
of electrical power
Manual bypass
Rotary switch controlled by the user, used to connect the loads directly to the
AC source. Transfer of the load to the manual bypass enables UPS maintenance
without interrupting the supply of power to the connected loads.
Normal (double
The normal UPS operating mode in which the AC source supplies the UPS which
conversion) mode
in turn supplies the connected loads (after electronic double conversion).
Normal AC source
Normal source of power for the UPS.
Relay contacts
Contacts supplying information to the user in the form of signals.
UPS
Uninterruptible Power Supply.
Summary of Contents for 9PX 1000i RT2U
Page 46: ...Page 46 9PX 1 3 KVA US_EN...
