99
6. Communication ports
Computer ports
The UPS provides USB and RS232 communication ports. For practical applications,
please use the communication cable provided by the accessory to connect to the
corresponding communication port.
RS-232 port communication default parameters:2400, 8, 1, 0.
(
The baud rate is 2400,
8 data bits, 1 stop bit, no parity
)
If USB and RS232 are connected at the same time, USB communication priority.
EPO (Emergency Power Off)
EPO on the rear panel of UPS, disconnecting the EPO can cut off the output of the
UPS. Need to resume UPS work:
•
Reconnect EPO
•
Continuously press button to confirm UPS is shut down to bypass or no output.
•
Continuously press button to restart.
Dry in & Dry out
Dry in is optical coupling input interface, which is connected to an external switch.
After custom setting the dry contact input function, it can perform operations such
as power on and power off.
Summary of Contents for 9SX 15KPMAU Series
