Maintenance and Troubleshooting
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
105
103: L2 Over Current Critical
The Phase 2 input current amperage (A) reading is greater than the
value configured as the over current critical alarm threshold.
Generates an alarm and is logged in the event log.
Alarm
104: L3 Over Current Critical
The Phase 3 input current amperage (A) reading is greater than the
value configured as the over current critical alarm threshold.
Generates an alarm and is logged in the event log.
Alarm
181:
ePDU
Control Power ON
The
ePDU
processor is powered on.
Logged in the event log only.
Event
200: Internal Temperature Critical
The temperature level reading is greater than the maximum
temperature threshold value.
Generates an alarm and is logged in the event log.
Alarm
203: Over Temperature Critical
The temperature level reading is greater than the maximum critical
temperature threshold value.
Generates an alarm and is logged in the event log.
Alarm
291: L1 Under Voltage Warning
The Phase 1 voltage reading is less than the value configured as the
low voltage warning threshold.
Generates an alarm and is logged in the event log.
Notice
292: L2 Under Voltage Warning
The Phase 2 voltage reading is less than the value configured as the
low voltage warning threshold.
Generates an alarm and is logged in the event log.
Notice
293: L3 Under Voltage Warning
The Phase 3 voltage reading is less than the value configured as the
low voltage warning threshold.
Generates an alarm and is logged in the event log.
Notice
294: L1 Over Voltage Critical
The Phase 1 voltage reading is greater than the value configured as
the over voltage critical alarm threshold.
Generates an alarm and is logged in the event log.
Alarm
295: L2 Over Voltage Critical
The Phase 2 voltage reading is greater than the value configured as
the over voltage critical alarm threshold.
Generates an alarm and is logged in the event log.
Alarm
296: L3 Over Voltage Critical
The Phase 3 voltage reading is greater than the value configured as
the over voltage critical alarm threshold.
Generates an alarm and is logged in the event log.
Alarm
330: Over Humidity Critical
The humidity level reading is greater than the minimum humidity
threshold.
Generates an alarm and is logged in the event log.
Alarm
338: L1 Over Current Warning
The Phase 1 current amperage (A) reading is greater than the value
configured as the over current warning threshold.
Generates an alarm and is logged in the event log.
Notice
339: L2 Over Current Warning
The Phase 2 input current amperage (A) reading is greater than the
value configured as the over current warning threshold.
Generates an alarm and is logged in the event log.
Notice
340: L3 Over Current Warning
The Phase 3 input current amperage (A) reading is greater than the
value configured as the over current warning threshold.
Generates an alarm and is logged in the event log.
Notice
Table 18. Alarms, Notices, and Events (Continued)
Alarm Number: Name
Description
Type