Operation Overview
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
50
Ethernet Link Speed & Duplex
Defines the Ethernet Link Speed and Duplex mode as follows:
l
Auto Negotiation (auto configuration - default)
l
100 Mbps Full Duplex
l
100 Mbps Half Duplex
l
10 Mbps Full Duplex
l
10 Mbps Half Duplex
DHCP Control
Indicates if the IPv4 is dynamically assigned by a DHCP server on the LAN.
Disabled: the Network Management Card uses a static IPv4 address.
Default is Enabled: the IPv4 address is dynamically assigned by a DHCP server on the LAN.
IPv4 Address
IPv4 Address of the Network Management Card. When the DHCP control is enabled, this address
is dynamically assigned by a DHCP server on the LAN. In this case, the user cannot modify it
manually.
Default is 192.168.123.123.
IPv4 Subnet Mask
IPv4 Subnet Mask of the Network Management Card. When the DHCP control is enabled, this
Subnet Mask is dynamically assigned by a DHCP server on the LAN. In this case, the user cannot
modify it manually.
Default is 225.225.0.0.
IPv4 Gateway Address
IPv4 address of the gateway on the LAN. When DHCP control is enabled, this address is
dynamically assigned by a DHCP server on the LAN. In this case, the user cannot modify it
manually.
Hostname
Network Management Card host name. This setting is sent in the DHCP request when the DHCP
is enabled. If the DHCP server is coupled with a DNS server, the user can access the ePDU Web
interface by using this host name instead of the IP address.
Maximum 31 characters.
Default is eDPUxy.
Where: xy = the two last digits of the MAC address.
IPv6 Control
Indicates if the IPv6 interface is enabled.
Enabled: the Network Management Card is accessible with an IPv6 address.
Default is Disabled: the Network Management Card is not accessible with an IPv6 address.
IPv6 Local Address
IPv6 Local Address.
IPv6 Auto Configuration Control
Indicates how the IPv6 addresses are configured.
Enabled: the IPv6 addresses (local and global) and prefix lengths are auto-configured.
Default is Disabled: the IPv6 addresses (local and global) and prefix lengths are manually
configured by the user.
IPv6 Global Address 1
IPv6 Global Address 1.
IPv6 Prefix Length 1
Prefix length associated with the IPv6 Global Address 1. This value must be in the range [0-128].
IPv6 Global Address 2
IPv6 Global Address 2.
IPv6 Prefix Length 2
Prefix length associated with the IPv6 Global Address 2. This value must be in the range [0-128].
IPv6 Gateway Address
IPv6 address of the gateway on the LAN.
Super User Login
Super User Login.
Maximum 15 characters.
Default is admin.
Super User Password
Super User Password.
Maximum 15 characters.
Minimum 5 characters.
Default is admin.
Telnet Control
Indicates if the Telnet interface is accessible.
Enabled: the Telnet interface is accessible.
Default is Disabled: the Telnet interface is not accessible.
Table 11. Network Management Card Settings (Continued)
Name
Description