Operation Overview
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
52
SNMPv3 USM User Security Level
Indicates the authentication required by the SNMP agent to accept the request from this user.
No Auth No Priv: no authentication password and no privacy key is required by the SNMP agent.
Auth No Priv: an authentication password is required but no privacy key is required by the SNMP
agent.
Auth Priv: an authentication password and a privacy key are required by the SNMP agent.
Default is Not Set: the SNMP agent rejects the user.
SNMPv3 USM User Authentication
Password
User-defined authentication password. Only required if the security level is Auth No Priv or Auth
Priv.
Maximum 24 characters.
Minimum 8 characters.
SNMPv3 USM User Privacy key
User-defined privacy key. Only required if the security level is Auth Priv.
Maximum 24 characters.
Minimum 8 characters.
Date Format
Indicates how the date must be displayed as follows:
l
dd/mm/yyyy (default)
l
mm/dd/yyyy
l
yyyy - mm -dd
l
dd mm yyyy
Time Synchronization Source
Indicates the time source. Values are:
Dynamically Configured by the NTP server.
Default is Manually Configured by user.
NTP Server
IPv4 or IPv6 or hostname of the NTP server to use for time synchronization.
Not applicable for manual time synchronization.
Maximum 63 characters.
Date
ePDU date.
This setting cannot be manually configured if the Time Synchronization Source is an NTP server.
Time
ePDU time.
This setting cannot be manually configured if the Time Synchronization Source is an NTP server.
Time Zone
Time zone to use when the time synchronization is done by an NTP server.
Not applicable for manual time synchronization.
Default is Greenwich Mean Time.
Daylight Saving Time Option
Indicates if the Daylight Saving Time option must be applied when the time synchronization with
NTP server is used.
Enabled: the summer/winter hour correction is applied to the time synchronization returned by the
NTP server.
Default is Disabled: the summer/winter hour correction is not applied to the time synchronization
returned by the NTP server.
IPv6 status
Indicates the status of the IPv6 configuration/addresses.
Invalid: the IPv6 addresses are not valid.
Valid: the IPv6 addresses are valid and can be used to access the Network Management Card.
Manual Configuration: the IPv6 addresses are manually configured and can be used to access the
Network Management Card.
Table 11. Network Management Card Settings (Continued)
Name
Description
