Operation Overview
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
54
ePDU Settings Table
Table 13 provides ePDU parameter settings.
Dry Contact Name
User-defined friendly name.
Maximum 31 characters.
Default is Contact x
Where x = the contact number
Dry Contact Alarm Control–Open state
Indicates if an alarm must be set when the dry contact is in the open state.
Informational: no alarm is set when the dry contact is open.
Alarm: an alarm is set when the dry contact is open. The active alarms presence icon is displayed
near the dry contact state.
Dry Contact Alarm Control–Closed state
Indicates if an alarm must be set when the dry contact is in the closed state.
Informational: no alarm is set when the dry contact is closed.
Alarm: an alarm is set when the dry contact is closed. The active alarms presence icon is
displayed near the dry contact state.
Table 13. ePDU Settings
Name
Description
ePDU Friendly Name
User-defined friendly name of the ePDU to identify it throughout the LAN.
Maximum 31 characters.
Default is ePDU.
Phase Current High Warning Threshold
High warning threshold for the phase current in A.
In the range [0-655].
Phase Current High Warning Threshold < Phase Current High Critical Threshold.
If the measurement exceeds this limit:
l
An alarm is set
l
Traps are sent to configured receivers
l
E-mail is sent to configured receivers
l
The high warning icon is displayed near the measurement value in the Web interface
Phase Current High Critical Threshold
High critical threshold for the phase current in A.
In the range [0-655].
Phase Current High Critical Threshold < Phase Current High Warning Threshold.
If the measurement exceeds this limit:
l
An alarm is set
l
Traps are sent to configured receivers
l
E-mail is sent to configured receivers
l
The high critical icon is displayed near the measurement value in the Web interface
Phase Voltage Low Warning Threshold
Low warning threshold for the phase voltage in V.
In the range [0-655].
Phase Voltage Low Warning Threshold < Phase Voltage Low Warning Threshold.
If the measurement is under this limit:
l
An alarm is set
l
Traps are sent to configured receivers
l
E-mail is sent to configured receivers
l
The high warning icon is displayed near the measurement value in the Web interface
Table 12. Environment Settings (Continued)
Name
Description
