Serial Interface Operation
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
91
9.
Do you want to attach the event log file to the e-mail sent to this receiver?
l
If yes, type
1
(Enabled) and press [Enter].
l
If no, type
0
(Disabled) and press [Enter].
10. What type of alarm notification do you want to provide to the e-mail receiver?
l
To always send a notification when an alarm is generated or is resolved, perform the following:
- If yes, type
1
(All Alarms) and press [Enter].
- If no, type
0
(Disabled) and press [Enter].
l
To send periodic e-mails, perform the following:
- Set the date of the next report by entering a day of the month and press [Enter]. For example,
entering 4 means the 4th day of the current month if the current system date is before this date. If
the current system date is higher than 4, this means the 4th day of the next month.
- Type the frequency of report in days and press [Enter]. For example, 7 means every 7 days.
- Choose the hour to send the report and press [Enter]. The format is
hh
:00, where
hh
= hour. The
24-hour range is 00:00–23:00.
Figure 65. Email Receiver Configuration
Test Email
This action consists of sending a test e-mail to the selected e-mail receiver.
To achieve this action, the following requirements must be met:
l
The Network Management Card is running in normal Operation mode.
l
The Network Management Card is connected to the LAN.
l
The Network Management Card owns a valid IP address.
l
The optional SMTP server authentication login and password are configured (if required).
l
The DNS servers (primary and optional secondary) for Domain Name Systems (DNS) must be configured if
the SMTP server is configured with the hostname.