Installation
Eaton Advanced ePDU User’s Guide P-164000042—Rev 1
www.eaton.com/ePDU
15
3.
Locate the anti-sliding safety screw (supplied). Choose the tapped hole on the rear of the ePDU that is just
above the topmost mounting clip on the ePDU. Attach the screw to the ePDU and tighten the screw
firmly.
4.
Snap the ePDU into the mounting clip feet. When you hear a clicking sound for each mounting clip foot,
the ePDU is secure.
5.
Carefully move the ePDU into position against the rail, verifying that the anti-sliding safety screw is above
the topmost mounting clip.
6.
Snap the ePDU into the rail, as shown in Figure 11. When you hear a clicking sound for each mounting clip,
the ePDU is secure.
Figure 11. Attaching the ePDU to the Rail
