General Description
Copyright © 2007-2018 Eaton Corporation. All Rights Reserved.
IPN 997-00012-07A1 July 2018
5
System Controller
The SC300 system controller is an advanced control and monitoring solution which provides a
full suite of communications options, including built-in Ethernet interface, Web server, and
SNMP agent.
Alarm notifications may be by Email, SNMP traps, SMS text messaging, dial-out to
PowerManagerII remote monitoring software, or relay contact closures.
The SC300 system controller provides control, communications and alarm functions.
The system controller is supplied pre-configured. Configuration changes can be made with the
keypad, or via a PC connected to the USB connector. Or changes can be made remotely (see
External Communications on page
For basic operating information see System Controller on page
. For further details refer to the
System Controller Operation Handbook (see Related Information on page
for details of system controller alarms.
SC300 System Controller
Power on LED (green)
Minor alarm LED (yellow)
Critical/Major alarm LED (red)
Color LCD
Soft keys (2)
Navigation keys (4)
Micro USB (type AB)
connector
Retaining screw
Power and system
communications connector
RS232 / RS485 connector
Ethernet connector
(100baseT) and status LEDs
Compatible Software
The following software is compatible with the SC300 system controller:
•
DCTools Configuration Software. Latest version is available free from
dcpower.eaton.com/downloads.
•
PowerManagerII Remote Control and Monitoring Software. Contact your Eaton dc product
supplier for further information (see Worldwide Support on page
•
Recommended web browsers: Microsoft Internet Explorer 11 or later, Mozilla Firefox 3.0 or
later, Chrome.
