Eaton COOPER POWER SERIES Installation Instructions Download

Page: 4 / 4

Eaton, Cooper Power, and PUSH-OP are

valuable trademarks of Eaton in the U.S. and

other countries. You are not permitted to use

these trademarks without the prior written

consent of Eaton.

IEEE Std 386™-2006 standard is a trademark

of the Institute of Electrical and Electronics

Engineers, Inc., (IEEE). This publication is not

endorsed or approved by the IEEE.

600 A 35 kV class PUSH-OP insulated standoff bushing

Catalog Data

CA650049EN

Effective May 2015

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

Eaton’s Cooper Power Systems Division

2300 Badger Drive

Waukesha, WI 53188

United States

Eaton.com/cooperpowerseries

Printed in USA

Publication No. CA650049EN

For Eaton's Cooper Power series PUSH-OP

bushing product information

call 1-877-277-4636 or visit:

www.eaton.com/cooperpowerseries.

Summary of Contents for COOPER POWER SERIES

Page 1: ...ovides a fully shielded submersible connection for deadbreak operation All standoff bushing brackets have a stainless steel eyebolt with a brass pressure foot The bushing body is bolted to a stainless...

Page 2: ...d shield grounding 2 88 73 mm 5 8 147 mm 6 0 152 mm 6 27 159 mm DRAIN WIRE LUG Provided for attachment of drain wire lead STAINLESS STEEL BRACKET AND LATCH MECHANISM Accepts 600 A PUSH OP Connectors a...

Page 3: ...Installation Instruction Sheet Table 1 Voltage Ratings and Characteristics Insulated Standoff Bushing Description kV Standard Voltage Class 35 Maximum Rating Phase to Ground 21 1 ac 60 Hz 1 Minute Wi...

Page 4: ...endorsed or approved by the IEEE 600 A 35 kV class PUSH OP insulated standoff bushing Catalog Data CA650049EN Effective May 2015 Eaton 1000 Eaton Boulevard Cleveland OH 44122 United States Eaton com E...