2
Replacement of Cover Gasket for Padmount Switchgear Side-Hinge-2 Models
Field Service inStructionS
MN285009EN April 2019
Figure 3.
Caulk Gun - Half Barrel Frame
Figure 4.
Proto MC10568000 9/16-inch impact socket
Figure 5.
10-inch flat screwdriver
Figure 6.
Small aluminum-bronze hammer
Figure 7.
3-inch putty knife/flexible scraper
Figure 8.
Proto J2120 aligning bar
Figure 9.
Hand wire brush, brass-bristle, low-scratch,
3/4-inch wide
Figure 10.
Containers/buckets for hardware removed
(Qty 2)
Figure 11.
Isopropyl alcohol (pre-moistened towels shown
here)
Figure 12.
Workstand (“sawhorse”)
