Page 5-7
IL17569
Effective June, 2001
Table 5.2 IR Residual OC:
Calculated residual time overcurrent (51R) and instantaneous (50R-1 & 50R-2)
device settings
Display Setting
Description
Setpoint Range/
Default
Selected
Refer to
Value Selection
Setting
Value
Sec. #
51R IR TOC Curve
Calculated Residual Time
5.5.2.3
Overcurrent Curve Setting
8.3
Shape:
Select curve characteristic shape
IT, I2T, I4T, FLAT, MOD,
XTRM
13.4
VERY, XTRM, IECA,
IECB, IECC
Reset:
Select curve reset characteristics
Inst, Calc, T Delay
Inst
Direction:
Directional control reserved
(Fixed at Both)
Both
for future use
51R IR TOC
Calculated Residual Time
5.5.2.3
Setting
Overcurrent Pickup and Time
8.3
Multiplier Settings
Pickup:
Select current pickup value
0.1 to 4.0 pu, or Disable
0.10
in per unit values (x I
nom
)
(0.01 increments)
Time Mult:
Select time multiplier
0.05 to 10.0
1.00
(0.01 increments)
50R-1 IR IOC 1
Calculated Residual
5.5.2.3
Overcurrent Element #1 Setting
8.3
Pickup:
Select current pickup value
0.1 to 20.0 pu, or Disable
1.00
in per unit values (x I
nom
)
(0.01 increments)
Delay (c):
Select delay time in cycles
0 to 9999
60
(1 cycle increments)
Direction:
Directional control reserved
(Fixed at Both)
Both
for future use
50R-1 IR IOC 2
Calculated Residual
5.5.2.3
Overcurrent Element #2 Setting
8.3
Pickup:
Select current pickup value
0.1 to 20.0 pu, or Disable
2.00
in per unit values (x I
nom
)
(0.01 increments)
Delay (c):
Select delay time in cycles
0 to 9999 cycles
600
(1 cycle increments)
Direction:
Directional control reserved
(Fixed at Both)
Both
for future use
Table 5.2 Unbalance Setting:
Selects voltage (47-1) unbalance and current (46-1) unbalance device settings
47-1 Voltage
Voltage Unbalance Settings
5.5.2.4
Unbal
8.6.1
Threshold:
Select magnitude of unbalance
1 to 100 volts, or Disable
Disable
required (either V1 or V2)
(1 volt increments)
% (V2/V1):
Percent negative sequence (V2)
4 to 40 percent
20
divided by positive sequence (V1)
(1% increments)
Delay (c):
Select delay time in cycles
0 to 9999 cycles
600
(1 cycle increments)
Summary of Contents for Cutler-Hammer FP-5000
