SLX9000 Adjustable Frequency Drives User Manual
5-10
For more information visit:
www.eaton.com
MN04003020E
January 2009
Keypad Control Menu (K3)
In the Keypad Control Menu, you can choose the control place, edit the frequency reference
and change the direction of the motor. You can enter the submenu level by pressing Menu
Button Right.
Table 5-6: Keypad Control Menu Selections
Selection of Control Place
There are three different places (sources) where the drive can be controlled. For each control
place, a different symbol will appear on the alphanumeric display:
●
I/O terminals
●
Keypad (panel)
●
Fieldbus
You can change the control place by entering the edit mode with Menu Button Right. The
options can then be browsed with the Browser buttons. Select the desired control place with
the ENTER button. See
Figure 5-7
.
Figure 5-7: Selection of Control Place
Parameters in Menu K3
Selections
P3.1 = Selection of control place
1
= I/O terminals
2
= Keypad
3
= Fieldbus
R3.2 = Keypad reference
P3.3 = Keypad direction
0
= Forward
1
= Reverse
P3.4 = Stop button activation
0
= Limited function of Stop button
1
= Stop button always enabled
P3.5 = PID reference 1
P3.6 = PID reference 2
STOP
READY
I/O Term
STOP
READY
I/O Term
STOP
READY
I/O Term
STOP
READY
I/O Term
STOP
READY
I/O Term
ENTER
reset
Summary of Contents for Cutler-Hammer SLX9000 Series
Page 1: ...SLX9000 Adjustable Frequency Drives User Manual Effective January 2009 Supersedes October 2008...
Page 2: ......
Page 171: ......
