55
Note:
The cabinet is heavy, please see spec weight provided on the carton/label.
Do not lift the unit’s front panel and rear panel.
Discard or recycle the packaging in a responsible manner, or store it for
future use.
Packing materials must be disposed in compliance with all local
regulations concerning waste. Recycling symbols are printed on the
packing materials to facilitate sorting.
3.3 Checking the accessory kit
Verify that the following additional items are included with the unit:
UPS including:
①
User manual
②
Tower
bracket
×4
③
USB cable
④
Rack
Ear bracket
×2
⑤
EPO contractor
⑥
Battery power cable
EBM including:
①
Tower
Extension plate of Stabilizer bracket *6
②
Rack Ear bracket
If you ordered other accessories, please contact with local supplier.
3.4 Install the unit
3.4.1 RT model:
Rack installing
This procedure is suitable for 19 inch rack cabinet installation with a
minimum of 800mm depth.
Identify the final position and keep ‘2U’ space for this installing.
Summary of Contents for DXRT 10KS31-IN Series
