69
5. Operation
5.1 Control panel
The UPS has a graphical LCD with five-button. It provides useful
information about the UPS itself, load status, events, measurements and
settings.
The following table shows the indicator status and description:
Indicator
Color
Status
Description
Green
ON
The UPS is operating normally on Online or on
High
Efficiency mode.
Yellow
ON
The UPS is on Battery mode.
Yellow
ON
The UPS is on Bypass mode.
Flash
The UPS is on Standby mode.
Red
ON
The UPS has an active alarm or fault.
Flash
The UPS has an active alarm or fault.
Summary of Contents for DXRT 10KS31-IN Series
