5 settings
5.5 Activating input delay (debounce)
176
Operating instructions
05/10 MN05013003Z-EN
www.eaton.com
5.5 Activating input delay (debounce)
Input signals are evaluated by easy with an input delay. This enables, for
example, the trouble-free evaluation of switches and pushbutton actuators
subject to contact bounce.
High-speed counter functions are evaluated independently of the debounce
function.
However, for many applications, it is necessary to evaluate very short input
signals. In this case, the debounce function can be switched off.
▶
Press
DEL
and
ALT
to call up the System menu.
▶
Select the SYSTEM menu.
The input delay (debounce) is set with the DEBOUNCE menu item.
5.5.1 Activating debounce (input delay)
If a tick
å
is next to
DEBOUNCE
indicates that this function is activated.
If this is not so, proceed as follows:
▶
Select
DEBOUNCE
and press
OK
.
Debounce mode will be activated and the display will show
DEBOUNCE
å
.
Press
ESC
to return to the Status display.
￫
Setting the time manually within the summer time end setting:
At 3:00 on summer time end the time is to be put back by one
hour to 2:00.
The clock is set at 1:30 to 3:05. easy will interpret this as 3:05
winter time. A time change will not be carried out.
￫
Default settings:
Debounce is activated.
￫
If easy is password-protected you cannot open the System
menu until you have “unlocked” it.
DEBOUNCE.
Æ
P BUTTONS
RUN MODE
CARD MODE
æ
DEBOUNCE å
Æ
P BUTTONS
RUN MODE
CARD MODE
æ
Summary of Contents for easy500, easy700
Page 4: ...II...
Page 28: ...1 1 5 operating principles 24 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 210: ...7 What Happens If 7 3 Event 206 Operating instructions 05 10 MN05013003Z EN www eaton com...
Page 234: ...9 Glossary of terms 230 Operating instructions 05 10 MN05013003Z EN www eaton com...
