5 Function blocks
5.11 D, text display
182
Control Relay easy800
11/11 MN04902001Z-EN
www.eaton.com
Display
Up to 16 characters per line and up to 4 lines can be displayed.
Displaying a variable
The function block enables the display of:
•
Actual values/setpoints of all function blocks except for HW and HY.
•
Markers (MB, MW and MD).
•
Analog inputs (scaleable)
•
Analog outputs.
•
Date and time.
The variables and setpoints can be inserted at any desired position in the
single-line text. The variables can be 4, 5, 7 and 11 places long. Incorrect
entries can cause characters to be overwritten or hidden.
The following formats for timing relay, time and date are supported.
Entering setpoints via keypad/display
The function block setpoints shown on the display and which can be defined
as constants can be edited. The possibility of editing must be activated in the
programming software. The values can be 4, 5, 7 and 11 places long.
Incorrect entries can cause characters to be overwritten or hidden.
Scaling
The values of the analog inputs an outputs can be scaled.
D16
Function block: Text output, number 16
+
Parameter set can be called via the PARAMETERS menu
CONTROL
SWITCHING
COMMUNICATION
SINGLE ?
Variable
Format
Timing relay
s s s . s s s
min min : s s
h h : min min
Time
h h : min min
Date
DD.MM : YYYY
Area
Selectable display range
Example
0 - 10 V
0 - 9999
0000 - 0100
0 - 10 V
± 999
-025 - 050
0 - 10 V
± 9.9
-5.0 - 5.0
