Eaton Small External Battery Cabinet (EBC-S)
and Large External Battery Cabinet (EBC-L)
User’s and Installation Guide
© Eaton Corporation plc 2015. All rights reserved.
Revision: 002
Document ID: P-164000504
18 (37)
3.2
Installation considerations
The battery cabinet installation must meet the following guidelines.
•
Install the system on a level floor suitable for computer or electronic
equipment.
•
Install the system in a temperature and humidity controlled indoor
area free of conductive contaminants and with sufficient air
exchange.
The battery cabinet dimensions are shown in Figure 2.
Figure 2. EBC-S and EBC-L dimensions
A DC-rated circuit breaker within each cabinet provides protection and
service isolation.
The battery cabinets use convection cooling to regulate internal
component temperature. Air inlets are at the bottom of the door and in
the large battery cabinet also at the bottom of the back wall and outlets
are on the rear of the cabinet. Allow clearance in front and rear of each
cabinet for proper air circulation.
The clearance required around the battery cabinet is shown in Table 1.
Summary of Contents for EBC-L
Page 36: ......
