Eaton Small External Battery Cabinet (EBC-S)
and Large External Battery Cabinet (EBC-L)
User’s and Installation Guide
© Eaton Corporation plc 2015. All rights reserved.
Revision: 002
Document ID: P-164000504
9 (37)
WARNING
To reduce the risk of fire or electric shock, install this battery cabinet in
a temperature and humidity controlled, indoor environment that is free
of conductive contaminants.
The ambient temperature must not exceed 40 °C (104 °F). Do not
operate the battery cabinet near water or excessive humidity (95%
maximum). The system is not intended for outdoor use.
Before you start any installation or service work, make sure that all AC
and DC power sources are disconnected. Power may come from
multiple sources. Also ensure system grounding / PE continuity.
In a parallel system, the output terminals may be energized even when
the cabinet is turned off.
Batteries can present a risk of electrical shock or burn from high short-
circuit current.
Electric energy hazard. Do not attempt to alter any battery wiring or
connectors. Attempting to alter wiring can cause injury.
Do not open or mutilate batteries. Released electrolyte may be toxic
and is harmful to the skin and eyes.
IMPORTANT: The battery may consist of multiple parallel strings.
Make sure that you disconnect all strings before installation.
Summary of Contents for EBC-S
Page 36: ......
