EDR-5000
IM02602007E
Device Planning Parameters of the Trip Circuit Monitoring Module
Parameter
Description
Options
Default
Menu path
Mode
Mode
Do not use,
Use
Use
[Device Planning]
Global Protection Parameters of the Trip Circuit Monitoring Module
Parameter
Description
Setting range
Default
Menu path
Mode
Select if trip circuit is going to be monitored when the
breaker is closed or when the breaker is either open or
close.
Closed,
Either
Closed
[Protection Para
/Global Prot Para
/Supervision
/TCM]
Input 1
Select the input configured to monitor the trip coil when
the breaker is closed.
1..n, Dig Inputs
DI-8P X1.DI 1
[Protection Para
/Global Prot Para
/Supervision
/TCM]
Input 2
Select the input configured to monitor the trip coil when
the breaker is open. Only available if Mode set to
“Either”.
Only available if: Mode = Either
1..n, Dig Inputs
-.-
[Protection Para
/Global Prot Para
/Supervision
/TCM]
ExBlo1
External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.-
[Protection Para
/Global Prot Para
/Supervision
/TCM]
ExBlo2
External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
1..n, Assignment
List
-.-
[Protection Para
/Global Prot Para
/Supervision
/TCM]
www.eaton.com
850
