EDR-5000
IM02602007E
Name
Description
DI-8 X6.DI 2
Signal: Digital Input
DI-8 X6.DI 3
Signal: Digital Input
DI-8 X6.DI 4
Signal: Digital Input
DI-8 X6.DI 5
Signal: Digital Input
DI-8 X6.DI 6
Signal: Digital Input
DI-8 X6.DI 7
Signal: Digital Input
DI-8 X6.DI 8
Signal: Digital Input
RO-4Z X2.ZI OUT
Signal: Zone Interlocking OUT
RO-4Z X2.RO 1
Signal: Relay Output
RO-4Z X2.RO 2
Signal: Relay Output
RO-4Z X2.RO 3
Signal: Relay Output
RO-4Z X2.RO 4
Signal: Relay Output
RO-4Z X2.DISARMED!
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating the risk of
taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact cannot be disarmed). YOU
MUST ENSURE that the relays are ARMED AGAIN after maintenance
RO-4Z X2.Outs forced
Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
RO-6 X5.RO 1
Signal: Relay Output
RO-6 X5.RO 2
Signal: Relay Output
RO-6 X5.RO 3
Signal: Relay Output
RO-6 X5.RO 4
Signal: Relay Output
RO-6 X5.RO 5
Signal: Relay Output
RO-6 X5.RO 6
Signal: Relay Output
RO-6 X5.DISARMED!
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating the risk of
taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact cannot be disarmed). YOU
MUST ENSURE that the relays are ARMED AGAIN after maintenance
RO-6 X5.Outs forced
Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
Event rec.Res all rec
Signal: All records deleted
Waveform rec.Recording
Signal: Recording
Waveform rec.Memory full
Signal: Memory Full
Waveform rec.Clear fail
Signal: Clear Failure in Memory
Waveform rec.Res all rec
Signal: All records deleted
Waveform rec.Res record
Signal: Delete Record
Waveform rec.Man. Trigger
Signal: Manual Trigger
Waveform rec.Start1-I
State of the module input:: Trigger event / start recording if:
Waveform rec.Start2-I
State of the module input:: Trigger event / start recording if:
Waveform rec.Start3-I
State of the module input:: Trigger event / start recording if:
Waveform rec.Start4-I
State of the module input:: Trigger event / start recording if:
www.eaton.com
997
