Eaton Lighting Systems EG2-NA 9850-000225-02 2
Please Read This First
The EG2-NA is built and tested to strict safety regulations. By following the steps listed
below and elsewhere within this guide, you can ensure safe installation and operation of
these controller units.
•
The EG2-NA must be installed only by a qualified electrician.
•
The installation must comply with the appropriate electrical codes and regulations in
force in your area.
•
The EG2-NA is designed for indoor installation and use only.
•
Ensure that all wiring used conforms fully to local specifications and is sufficiently
rated for the installation.
•
All new wiring must be fully verified before applying power.
•
The high voltage supply should be fed to the EG2-NA via an external isolation breaker
with sufficient capacity for the planned installation.
•
Ensure that the supply is fully isolated at an external breaker before removing
the chassis covers. Test that power has been removed before starting to handle
conductors.
•
Ensure that high voltage and low voltage wiring remains separate.
Contents
Safety
2
Introduction 3
Dimensions 3
Specification 3
Weight
3
Product Overview
4
Mounting
4
Supply Wiring
5
Control Wiring
5
Setup Instructions
6
