EMR-5000
IM02602012E
System Module Input States
Name
Description
Assignment via
Ack LED-I
Module Input State: LEDs Acknowledgment by Digital Input.
[Device Para
/Ex Acknowledge]
Ack RO-I
Module Input State: Acknowledgment of the Relay Outputs.
[Device Para
/Ex Acknowledge]
Ack Comm-I
Module Input State: Acknowledge Communication via Digital Input.
The replica that Communication has received from the device is to
be reset.
[Device Para
/Ex Acknowledge]
PS1-I
State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS2-I
State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS3-I
State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS4-I
State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
Maint Mode-I
Module Input State: Arc Flash Reduction Maintenance Switch
[Service
/Maint Mode]
www.eaton.com
318
