EMR-5000
IM02602012E
Single Line Diagram
For construction of a single line diagram, please address to our technical support.
The single line diagram includes the graphically description of the switchgear and their designations (names) as well as
their features (short circuit proof or not ...). For displaying in the devices software, the switchgear designations (e. g.
QA1, QA2, instead of SG[x]) will be taken from the single line diagram.
Beside switching properties a configuration file also includes a single line diagram. Switching properties and single line
diagram are coupled via the the configuration file. Since the single line diagram is independent of the device type, a
new/other single line diagram can be imported into the configuration file.
Whenever a configuration file is loaded into a protection device, a single line diagram will
be always loaded at the same time.
This means, whenever a configuration file is transfered from one to another device, a
suitable single line digram has to be loaded by means of the Device Planning menu.
www.eaton.com
417
