Troubleshooting
Eaton ePDU G3 Troubleshooting Guide P-164000278—Rev 1
www.eaton.com/ePDU
17
Figure 8 provides an example of a Type Code 2 system alarm number code.
2 1 1 4 0 2
Number code 211402: Eaton ePDU Critical Overcurrent L2 Phase
Identification code = 114
Index code = 02
Type code 2 = Eaton ePDU
Figure 8. Example Type Code 2 (Eaton ePDU) Code
Table 11 lists fault conditions, potential causes, and possible troubleshooting actions you can take in response
to Type Code 2 or Type Code 3 problems.
Table 11. ePDU and User Alarms and Events
Type Code
Identification and
Index Code
Alarm or Event
Description
2
201000
Dry Contact 1 Not Active
The signal for Dry Contact 1 is active.
2
201100
Dry Contact 1 Active
The signal for Dry Contact 1 is not active.
2
202000
Dry Contact 1 Open
Dry Contact 1 is open.
2
202100
Dry Contact 1 Closed
Dry Contact 1 is closed.
2
203000
Dry Contact 2 Not Active
The signal for Dry Contact 2 is active.
2
203100
Dry Contact 2 Active
The signal for Dry Contact 2 is not active.
2
204000
Dry Contact 2 Open
Dry Contact 2 is open.
2
204100
Dry Contact 2 Closed
Dry Contact 2 is closed.
2
205000
Sensor Probe Communication Failure Cleared
Sensor Probe communication failure is cleared
2
205100
Sensor Probe Communication Failure
Sensor probe communication failure detected
2
208000
Sensor Probe Not Connected
Sensor probe not connected since firmware startup
2
208100
Sensor Probe Connected
Sensor probe connected at least once since firmware
startup
2
206000
Humidity No Threshold
No humidity threshold has been triggered.
2
206100
Humidity Warning Low Threshold
The humidity level reading is less than the value
configured as the low humidity warning threshold.
2
206200
Humidity Critical Low Threshold
The humidity level reading is less than the value
configured as the low humidity critical threshold.
2
206300
Humidity Warning High Threshold
The humidity level reading is greater than the value
configured as the high humidity warning threshold.
2
206400
Humidity Critical High Threshold
The humidity level reading is greater than the value
configured as the high humidity critical threshold.
2
207000
Temperature No Threshold
No temperature threshold has been triggered.
2
207100
Temperature Warning Low Threshold
The temperature level reading is less than the value
configured as the low temperature warning
threshold.
2
207200
Temperature Critical Low Threshold
The temperature level reading is less than the value
configured as the low temperature critical threshold.
2
207300
Temperature Warning High Threshold
The temperature level reading is greater than the
value configured as the high temperature warning
threshold.
