12
EATON
IB528001EN
Installation instructions
Installation Instructions - Arena Series
3. Press the button on the top of the laser to turn on and aim the Luminaire to the point designated on the installation
diagram/schedule.
otee:
N
To preserve battery life, be prepared to adjust Luminaire before turning laser on, then adjust Luminaire and turn laser
back off until ready at the next Luminaire.
4. To adjust Luminaire aiming direction:
a.Orient the Luminaire about the top mounting point.
b.Tilt the Luminaire up or down by slightly loosening the large Allen bolt on both sides of the Luminaire where the
mounting bracket connects to the LED modules.
c.Retighten all hardware after the Luminaire is aimed to the correct point.
otee:
N
Luminaire may shift while tightening: After tightening Luminaire bolts, briefly turn laser back on to verify aim point is
still correct.
SUGGESTED AIMING TECHNIQUES:
1. Two-Person Aiming
a. This technique works best for a smaller area such as basketball-only layout.
b. For each luminaire, one person acts as the spotter by locating the aiming point and standing on the court in that
location while the other person aims that luminaire at the feet of the spotter.
c. Repeat the procedure for each luminaire.
2. Paper Plate Grid
a. This technique is helpful for larger layouts such as hockey rinks or to allow multiple Luminaires to be aimed
simultaneously.
Figure 10. Hex bolt
Allen Bolt
Figure 9. Aiming Mount
