19
Installation Guide: EV wall charger and EV wall charger plug-in
EV WALL CHARGER AND EV WALL CHARGER PLUG-IN
www.eaton.com
STEP B-2
STEP B-3
Single & dual port
Single & dual port
EV WALL CHARGER PEDESTAL INSTALLATION
Install EV wall charger base
B
Reference:
1.
Mechanical closer
Figure 10
• Remove the mechanical closer
(1)
from
the conductor entry point on the front of
the pedestal .
Note: If you are not ready to install the
EV charging station at this time, do not
remove the mechanical closer.
1
• Install the conduit fitting
(2)
through
the EV pedestal upper
(1)
and EV
wall charger base
(3).
Note: The o-ring
(4)
must be placed
between the EV pedestal and the
EV wall charger during installation.
Failure to do so will result in
voiding any warranty.
2
1
3
4
5
Reference:
1.
EV pedestal upper
2.
1" trade size conduit fitting
3.
EV wall charger base
4.
33 mm ID o-ring
5.
1" conduit nut
Figure 11
