41
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.6.5 Set ring melody for users 1-6
Main menu\User list\n UserName\
Ring melody
Navigate to the
Ring melody
element of the user menu of user n, whose ring melody settings you want to specify.
Then press the
key to open the
Ring melody
dialog, which is described below.
Ringtone xxx...........
Setting variable to select the call variant xxx, for which the Melody, Vol and Speed settings should be
made. Press the
key whenever you want to switch to one of the call variants below.
<int>
Ring melody for calls from internal subscribers
<ext>
Ring melody for calls from external subscribers
<ret>
Ring melody for recalls
<msg>
Ring melody for inbound messages
Start | Stop...........
Setting variable for starting and stopping the ring melody generator. Press the key, to star the playback
of the set ring melody, and press it again to stop the playback.
Melody:................
Selection parameter to specify the ring melody.
Default
Default melody
3tone 1 – 3tone 3
Triad tones 1-3
2tone 1 – 3tone 5
Two tones 1-5
tone 1 – tone 2
Single tones 1-2
ringer
Ringer
Vol: ..................
Selection parameter to set the volume.
Def
Default volume
1 - 11
Volume levels 1-11
Max
Maximum volume
Speed:.................
Selection parameter to set the playback speed.
Def
Default playback speed
1 - 5
Playback speed 1-5
Max
Maximum playback speed
Time:..................
Selection parameter for selection of the time format to be used
Default
Date and time display in standard format dd.mm.yy hh:mm
24H
Date and time display in 24 h format dd.mm.yy hh:mm
AM/PM
Date and time display in 12 h format mm/dd hh:mm xm
After you have made the settings, press the menu key as often as necessary until the confirmation message
Save
changes
? appears, which you can affirm by pressing
or reject with the key sequence
.
After you have made the settings, press the menu key as often as necessary until the confirmation message
Save
changes?
appears, which you can affirm by pressing
or reject with the key sequence
.
5.1.6.6 Specify function keys for users 1-6
Main menu\User list\n UserName\
Function keys
Navigate to the
Function keys
element of the user menu of user n, whose function keys you want to specify. Then
press the
key to open the
Function keys
menu of the same name, which you can assign a selectable function
to each of the 16 functions keys, which is executed when the respective key on the phone is pressed. The figure below
shows the opened list of function keys and the differently configured dialogs for the function keys 1 (F1) and 2 (F2), which
are to be opened from the list by pressing the
key.
Shift 1
F1
Shift 2
F2
Shift 3
F3
Shift 4
F4
Shift 5
F5
Shift 6
F6
Shift 7
F7
Shift 8
F8
Shift 9
F9
Shift 10
F10
Input 1
F11/F12
Input 2
F13/F14
Input 3
F15/F16
7-16
Input 1
Mode 1
Mode 2
Mode 3
Function keys
1 Jule
2 ...................
3 ...................
4 ...................
5 ...................
6 ...................
Function keys
Type: Destination no.
Text:Jule
Icon:
Number:5001
Prepare:
Off
Function keys
Type: Key not assigned
F11
F11
F12
F12
Function keys list
Function keys dialogs
Key
Function key
7-16
Input 1
Mode 1
Mode 2
Mode 3
Function keys
1 Jule
2 ...................
3 ...................
4 ...................
5 ...................
6 ...................
Function keys
Type: Destination no.
Text:Jule
Icon:
Number:5001
Prepare: Off
Function keys
Typ: Key not assigned
F11
F11
F12
F12
