23
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
Perform transfer. Connect your current conversational partner A with a conversational partner B, and you end the call yourself.
With the introduction of the transfer you ask the phone to enter the subscriber number for conversational partner B and
establish the connection with them, after which you confirm the input by pressing the redial key .
Xyz
During your call with conversational partner A, another caller reaches you. Signaled acoustically as a call-waiting tone and
indicated in the display as a waiting call, you have the following options for dealing with the waiting caller.
You reject the caller, who then hears the busy signal.
You switch to the caller and put conversational partner A on hold, who therefore cannot listen in on your call
with the caller (conversational partner B). The further procedure corresponds to the callback, with the dialling
being omitted.
4.3.3.1 Callback/Toggle/Conference Page 23
0
R
2
R
abc
4.3.3 Operate multiple connections
4.3.3.1 Callback/Toggle/Conference
With the introduction of the callback by pressing the
R
key, conversational partner A is put on hold and the phone asks
you if you want to input the subscriber number for your conversational partner B. After successful input, the phone
establishes the connection to conversational partner B.
Callback activated
Select subscriber B
Callback/Toggle
2
B
A C
5
K
J L
8
U
T V
1
4
H
G I
7
Q
P RS
3
E
D F
6
N
M O
9
X
W YZ
0
#
Annemarie 5008
Jule 5001
Annemarie 5008
18.02.21 14:17 0:15
Please dial
Annemarie 5008
Jule 5001
Annemarie 5008
5011
18.02.21 14:18 0:25
Calling
Annemarie 5008
Jule 5001
Annemarie 5008
Malte 5011
18.02.21 14:18 0:25
Connected
Highlights the connection on hold
Indicates receiver mode
Indicates an encrypted audio transmission
---------- Callback/Toggle -----------
You end the active connection with conversational partner B (A) and return to the on-hold connection with conversational
partner A (B). ..................................... Call conversation
2
R
You change (toggle) the conversational partner; the connection with active conversational partner B (A) is put on hold and
the previously on-hold connection with conversational partner A (B) becomes active.
3
R
You and your two conversational partners A and B are interconnected in a conference in which you can all speak to
each other. ............................ Conference
4
R
You connect your two conversational partners A and B with each other and you end the call yourself.
------------ Conference -------------
You end the conference, disconnect the last active connection with conversational partner B (A) and return to the on-hold
connection with conversational partner A (B). ........... Call conversation
2
R
You end the conference and return to both connections with active/on-hold assignment. Conversational partner B (A) is put
on hold and the connection with conversational partner A (B) remains active. ................................ Callback/Toggle
3
R
def
You end the conference and return to the two original connections. The connection to conversational partner B (A) remains
active and the hold status of the connection with conversational partner A (B) is restored. .................................. Callback/
Toggle
4
R
GHI
You connect your two conversational partners A and B with each other and you end the call yourself.
-------- Dial ---------
Enter the subscriber number with the numeric keypad keys manually.
R
Alternatively
, perform callback. The list of received calls opens, from which you select the caller whom you want to call or
call back using the
and
keys. Finally, press the redial key to start the dialling process.
Alternatively
, perform redial. The list of outgoing calls opens, from which you can select the caller whom you want to call
again using the
and
keys. Finally, press the redial key to start the dialling process.
2
B
A C
5
K
J L
8
U
T V
1
4
H
G I
7
Q
P RS
3
E
D F
6
N
M O
9
X
W YZ
0
#
abc
def
GHI
abc
