24
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
4.3.3.2 Transfer
With the initiation of the transfer by pressing the key, you initially remain connected with your conversational partner
A, and the phone asks you to input the subscriber number for subscriber B, whom you want to connect with your
conversational partner A. After successful input and final pressing of the key, the transfer process begins. Here your
original conversational partner A calls the subscriber B you have selected; you yourself have ended the call and can hang
up the receiver.
Transfer initiated
Select subscriber B
Idle mode
2
B
A C
5
K
J L
8
U
T V
1
4
H
G I
7
Q
P RS
3
E
D F
6
N
M O
9
X
W YZ
0
#
Transfer
5011
Annemarie Bison 5008
22.02.21 16:16
1
1
Transfer
Indicates the numerical mode for manual input (indirect dialling)
Indicates that headset mode is switched on in the menu
Indicates the connection status to the gatekeeper
-------- Dial ---------
2
B
A C
5
K
J L
8
U
T V
1
4
H
G I
7
Q
P RS
3
E
D F
6
N
M O
9
X
W YZ
0
#
Manual dialling. Enter the subscriber number with the numeric keypad keys. In this operating mode, you can enter
numbers and text and correct the entry if necessary. Finally, press the redial key to start the dialling process.
R
Alternatively,
perform callback. The list of received calls opens, from which you select the caller you want to
connect with your conversational partner A using the
and
keys. Finally, press the redial key to start the
dialling process.
Alternatively,
perform redial. The list of outgoing calls opens, from which you select the caller you want to
connect with your conversational partner A using the
and
keys. Finally, press the redial key to start the
dialling process.
1
4.3.4 Miscellaneous
4.3.4.1 Subscriber numbers
Your phone can not only dial normal subscriber numbers, but also H.323 names and IP addresses. If a subscriber number
includes characters other than the numerical characters 0-9 | * | #, it will be interpreted as an H.323 name. A preceding @
symbol in an H.323 name will be automatically removed before dialling.
4.3.4.1.1 Manual input in immediate dial mode
This mode supports only the input of the characters 0-9 | * | # from the numeric keypad and dials the characters step-by-
step with the input.
4.3.4.1.2 Manual input in indirect dialling mode
This mode supports the input of numerical and text characters, allows for the correction of input errors and dials the
input character sequence as a single block if you identify the input as complete by pressing . This mode is indicated
by a small, inversely displayed box in the lower right corner of the display. The box here indicates whether the input is
currently in numerical mode
1
or in text mode
a
|
A
. Switch to text mode
1
>
a
for example by holding down the
2
key
until the first text character of the text list that is associated with the key appears in the display. Press the key in rapid
succession to replace the current character “|a” by the next character “|b” from the list. Pause until the insertion point
(cursor) switches from the left to the right side of the last selected character “b|” to definitely adopt the character. Return
to numerical mode
a
>
1
occurs if your character selection ends with a number or you press the button.
1
Indicates the numerical mode for manual input (indirect dialling)
Annemarie Bison 5008
5
Indirect dialling
1 a A
Text mode
1
Digit mode
abc
