32
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.2.1 Directory input
The directory input dialog is used to create a new contact or to edit an existing contact.
5.1.2.1.1 Settings
Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's
Subscriber
input parameter calls.
5.1.2.1.1.1 Set ring melody for contact
Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's
Subscriber
input parameter calls.
Subscriber:............
Input parameter to specify the subscriber's name, under which the entry will be included in the
alphabetically ordered contact list. The input field is located in the line below the designation
Subscriber.
Number:
1)
..............
Input parameter to specify the subscriber number and the optional DTMF characters, which are
transferred to the destination phone after successful connection. The optional DTMF characters are to be
placed after the subscriber number, separated by a comma.
4711
// Subscriber number
4711,*101#
// Subscriber number with following DTMF characters transmission
Name:
1)
................
Input parameter to specify the subscriber's name, which manages the dialling information instead of the
number (e.g. subscriber designation within the PBX used).
Settings...............
Opens the settings dialog in which the ring melody behavior for the subscriber's calls can be set.
Delete
2)
...............
Deletes the current entry from the contact list.
1)
To specify the dialling information, either the input parameter
Number
or the input parameter
Name
must be used.
2)
The
Delete
command is only available if directory input was used to edit an existing contact.
After you have made your specifications, press the menu key
as many times as necessary until the text message
Entry saved
appears.
Ringing:...............
Selection parameter for switching ringing on/off.
On
The acoustic ring melody signaling (ringing) is switched on.
Off
The acoustic ring melody signaling (ringing) is switched off.
Ring melody:...........
Opens the ring melody dialog, in which the melody, volume and speed of the ring melody signaling
(ringing) can be set.
5.1.2.1.1.1 Set ring melody for contact Page 32
Registration:..........
Opens the registration dialog, in which nothing can be set.
Start | Stop...........
Setting variable for starting and stopping the ring melody generator. Press the
key to start playback
of the set ring melody and press it again to stop playback.
Melody:................
Selection parameter to specify the ring melody.
Default
Default melody
3tone 1 – 3tone 3
Triad tones 1-3
2tone 1 – 3tone 5
Two tones 1-5
tone 1 – tone 2
Single tones 1-2
ringer
Ringer
Vol:...................
Selection parameter to set the volume.
Def
Default volume
1 - 11
Volume levels 1-11
Max
Maximum volume
Speed:.................
Selection parameter to set the playback speed
Def
Default playback speed
1 - 5
Playback speed 1-5
Max
Maximum playback speed
