47
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.6.6.16 “Redirect” function for selected key f
Function key f causes inbound calls to be diverted to the destination configured in the dialog without an interim
connection to the caller. For inbound calls, press function key f. The device then diverts the pending or waiting call to the
configured destination.
Type: Redirect
Selection parameter set to function type
Redirect
.
Text:.................
Input parameter for optional specification of a caption text.
Icon:.................
Selection parameter for the optional specification of an icon.
Number:...............
Input parameter to specify the destination number.
5.1.6.6.17 “Phone lock” function for selected key f
Function key f controls the switching on/off of the phone lock. Before the switching of the lock introduced by pressing
function key f becomes effective, the device asks the user to input the PIN number, which must then be concluded by
pressing the key. The switched-on lock is symbolized by the icon, which is shown on the left in the display footer
when the device is in idle mode.
Type:
Phone lock
Selection parameter set to function type
Phone lock
.
State:................
Selection element for setting the function state.
1
Phone lock is switched off, phone can be used.
2
Phone lock is switched on, phone cannot be used.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
5.1.6.6.18 "Headset” function for selected key f
Function key f controls the enabling/locking or switching on/off of the headset mode.
Type: Headset
Selection parameter set to function type
Headset
.
State:................
Selection element for setting the function state.
1
Headset locked or switched off.
2
Headset enabled or switched on.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
Mode:.................
Selection parameter to specify the function’s mode of operation.
Enable
Function controls the enabling and locking of the headset mode.
Control
Function controls the switching on and off of the headset conversation mode if the headset mode
is enabled.
5.1.6.6.19 “Hotdesk” function for selected key f
Function allows for the flexible change from user 1 to a callable co-user. For this purpose, function key f must be pressed,
whereupon the
Register
dialog opens, in which the co-user is defined who is to be registered and activated. Pressing
the menu key is followed by the registration of the selected user, whose name/phone number replaces that of the
previously active user in the display header. The next actuation of the function key f causes the user change in the
opposite direction; the registration of the co-user is deleted and user 1 becomes the phone’s active user again.
Type: Hotdesk
Selection parameter set to function type
Hotdesk
.
State:................
Selection element for setting the function state.
1
User 1 activated.
2
Selected co-user activated.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
