Eaton Ferrups FX UPS P-164000906 Eaton Ferrups FX User’s Guide P-164000906—Rev 05
33
C
Chhaapptteerr 77 O
Oppeerraattiioonn
77..11
FFrroonntt P
Paanneell IInnddiiccaattoorrss
The UPS Remote Control Display indicators indicate how the UPS is operating and also alert you of potential power problems.
Eaton Ferrups FX UPS Remote Control Display (RCD)
Figure 17. Remote Control Display
Scrolling Display
The RCD will continuously scroll and display the following items at the top of the display:
•
EATON Ferrups FX
•
Mode: The UPS will determine the correct operating mode and updates automatically.
•
AVR: Displays Off, Normal, Buck or Boost if the UPS is operating normally but utility is outside normal
operating thresholds.
•
ABM: Status of the ABM Charger in the UPS
•
Beeper: Indication if the beeper is disabled or enabled.
•
Charger: Displays if the charger is enabled or disabled
The following information will be shown on the home screen at all times:
•
Current Date : Will always be displayed unless viewing the Logs parameter #24.
•
Current Time: Will always be displayed unless viewing the Logs parameter #24.
•
Level: This is the level of the password programed into the UPS. ( Only visible if a password is entered ).
NOTE
The display will time out and go blank after 3 minutes of inactivity, press any button to
resume normal activity,
