2
Eaton Ferrups FX UPS P-164000906 Eaton Ferrups FX User’s Guide P-164000906—Rev 05
Providing outstanding performance and reliability, the Eaton Ferrups FX’s unique benefits include the following:
•
Active voltage regulation converts power from almost any AC source into computer grade power.
•
Provides regulated output voltage without drawing power from batteries, keeping the batteries fully
charged from unexpected blackouts.
•
Complete offering of power management software included to ensure data availability remotely.
•
ABM® technology that uses advanced battery management to increase battery service life, optimize
recharge time, and provide a warning before the end of useful battery life. ABM will be enabled when the
total UPS and EBM battery capacity is less than or equal to 200Ah.
11..33
R
Reecceeiivviinngg aanndd U
Unnppaacckkiinngg TThhee U
UP
PS
S
Perform an external inspection of the shipment. When the UPS arrives inspect the shipment for any signs of
damage. Do not attempt to install the UPS system if damage is apparent. If any damage is noted, contact Eaton
and file a damage claim with the shipping agency.
The Eaton Ferrups FX 3100 UPS has a castor kit making it easy to move the UPS to the installation site once it
is unpacked. If the receiving area is far from the site, Eaton recommends that you move the UPS with a pallet
jack before the UPS is unpacked.
Figure 1. UPS Ramp Attachment
Ramp
Pallet
Screws
Bracket
For the Eaton Ferrups FX UPS units that come with a supplied ramp follow the following steps:
1.
Remove the outer cardboard container.
2.
Remove any filler boxes or packing material.
3.
Remove the ramp.
4.
Attach the supplied ramp to the pallet with the two brackets and four wood screws provided. See
5.
Remove all the bolts that attach the UPS anchor brackets to the pallet. Retain the brackets if planning to
mount the UPS to the floor.
